钢筋混凝土框架结构基于性能的塑性设计方法

doi:10.3969/j.issn.0258-2724.2013.04.007

熊二刚¹,
张倩²

基金项目:

国家自然科学基金资助项目(51108035,51178388)

陕西省自然科学基金资助项目(2010JQ7006)

中央高校基本科研业务费专项资金资助项目(CHD2012ZD012)

计量
- 文章访问数:1023
- HTML全文浏览量:110
- PDF下载量:371
- 被引次数:0
出版历程
- 收稿日期:2012-10-24
- 刊出日期:2013-08-25

Performance-Based Plastic Design Method of Reinforced Concrete Frames

XIONG Ergang¹,
ZHANG Qian²

摘要

摘要:为预测和控制钢筋混凝土框架结构在罕遇地震作用下的非弹性性能,基于功能平衡原理,提出了一种钢筋混凝土框架结构基于性能的塑性设计方法.该方法预先选定目标侧移和屈服机制,根据功能平衡方程即可得到结构的设计基底剪力;采用塑性设计法设计框架构件和节点,以达到预期的屈服机制和性能.采用此方法对一幢8层钢筋混凝土框架结构进行了设计,并采用动力时程分析法验证了该方法的可行性.研究结果表明,采用基于性能的塑性设计方法设计的钢筋混凝土框架结构最终呈现预期的屈服机构,非弹性性能沿结构高度分布均匀合理.
- 基于性能的塑性设计/
- 目标侧移/
- 屈服机制/
- 功能方程
Abstract:In order to desirably predict and control the inelastic activity of reinforced concrete (RC) frames subjected to severe ground motions, on the basis of energy-work balance a performance-based plastic design (PBPD) method for the design of RC frames was presented. In the PBPD method, the design base shear is obtained based on the energy-work balance and pre-selected target drift and yield mechanism. Plastic design was performed to detail the frame members and connections in order to achieve the targeted yield mechanism and behavior. The method was applied to an eight-storey RC frame and validated by inelastic dynamic analyses. The results indicate that the frames develop desired strong column sway mechanisms, and the story drifts are well within the target values to meet the desired performance objectives.
- PBPD (performance-based plastic design)/
- target drift/
- yielding mechanism/
- work-energy equation

HTML全文

参考文献 (16)

张倩. 钢框架结构基于性能的抗震设计方法研究[D]. 西安:西安建筑科技大学土木工程学院,2008.

李应斌. 钢筋混凝土结构基于性能的抗震设计理论与应用研究[D]. 西安:西安建筑科技大学土木工程学院,2004.

管民生. 基于性能的钢筋混凝土框架结构抗震性能评价方法与应用研究[D]. 广州:华南理工大学土木与交通学院,2011.

中国建筑科学研究院. GB50011—2010建筑抗震设计规范[S]. 北京: 中国建筑工业出版社,2010.

樊长林,张善元,路国运. 钢筋混凝土框架刚塑性抗震设计方法研究[J]. 世界地震工程,2009,25(3): 67-73. FAN Changlin, ZHANG Shanyuan, LU Guoyun. Study on rigid-plastic seismic design of reinforced concrete frame structures[J]. World Earthquake Engineering, 2009, 25(3): 67-73.

周磊. 多层钢框架性态抗震设计:屈服点谱法. 苏州:苏州科技学院土木工程系,2011.

辛力,梁兴文,白亮. RC框架结构直接基于位移的抗震优化设计方法[J]. 地震工程与工程振动,2008, 28(5): 79-86. XIN Li, LIANG Xingwen, BAI Liang. Optimal method for direct displacement-based seismic design of RC frames[J]. Journal of Earthquake Engineering and Engineering Vibration, 2008, 28(5): 79-86.

MEDHEKAR M S, KENNEDY D J L. Displacement-based seismic design of buildings-application[J]. Engineering Structures, 2000, 22(3): 210-221.

GHORBANIE-ASL M. Performance-based seismic design of building structures[D]. Carleton: Department of Civil and Environmental Engineering, Carleton University, 2007.

Applied Technology Council. FEMA-445 Next-generation performance-based seismic design guidelines: program plan for new and existing buildings[S]. Washington D C: Federal Emergency Management Agency, 2006.

SAHOO D R, CHAO S H. Performance-based plastic design method for buckling-restrained braced frames[J]. Engineering Structures, 2010, 32(9): 2950-2958.

LIAO W C. Performance-based plastic design of earthquake resistant reinforced concrete moment frames[D]. Ann Arbor: Department of Civil and Environmental Engineering, The University of Michigan, 2010.

LEE S S. Performance-based design of moment frames using target drift and yield mechanism. Michigan: Department of Civil and Environmental Engineering, The University of Michigan, 2002.

CHAO S H, GOEL S C, LEE S S. A seismic design lateral force distribution based on inelastic state of structures[J]. Earthquake Spectra, 2007, 23(3): 547-569.

LEELATAVIWAT S, GOEL S C, STOJADINOVIC B. Toward performance-based seismic design of structures[J]. Earthquake Spectra, 1999, 15(3): 435-461.

中国建筑科学研究院. GB50009—2012建筑结构荷载规范[S]. 北京: 中国建筑工业出版社,2012.

施引文献

附加材料 (0)

访问统计

点击查看大图

计量

文章访问数:1023
HTML全文浏览量:110
PDF下载量:371
被引次数:0